Car Stereo Line Output Converter (przetwornice)

to the HU Some amplifiers work fine without them others don t If the LOC is installed behind the radio I would recommend connecting the shield ground wires to the case of the radio

I just stumbled upon an enjoyable article by aln_author, posted earlier today, and entitled Car Stereo Line Output Converter (przetwornice) that I suggest you all read. I’ve included some little excerpts in the hope of piquing your interest!

It has a transformer and (10 to 20 watts) a high-voltage resistor and connects to amp by making use of RCA patch cable. The amplifier inside the head unit is now being loaded through the resistor. It’s also a flexible gain feature to get output. Most of the line output converters have wire to ground the transformer. If your head unit is "on" the voltage over the output speaker wires, is virtually half the DC battery and changes rapidly when it is "on". Whereas, whenever the unit is "off", the voltage is 0 volt DC. Even as we already said, that your head unit’s outputs provides a large quick increasing amount of DC voltage whenever the head unit is fired up. The transformer can provide the variation of voltage between your two input terminals.

 [...]

You can get kinds of Line Output Converters you can find but Gizmo Peripheral is remained the industry leader in good quality LOC’s. You can get simple Instructions for those line output converters which have to do in consideration. So connect the audio cable speaker’s creates the extender from the car stereo. The cloths line output converter then trims down all the inwards bound speakers’ level audio signals so that the outgoing signals get adjusted to your preamp inputs over the amplifier. An adaptor scosche performs many applications. It accepts speaker level outputs and converts those to preamp level outputs. That fader control feature additionally that means; we could hook 2 channel amplifier or 4 channel amplifier easily that will not lose any fader control.

 [...]

Installers use to transform their speaker level stereo to RCA levels by way of Hi/low adaptors which hooks a great external car stereo amplifier. Hi/low converter with 2 channels and 4 channels can be found with or without adjustments. It is essential to identify that the match amongst the car stereo and amplifiers are indifferent. Adjustable hi/low converters allow to fine tune the hi/low device to correspond to levels vehicle consequently they are the favourite in adjustable output converters. There are several adjustable output converters in 2 channels and 4 channels available. Just like, Soundgate "LOC A" adjustable high performance Hi/Low adaptor features full DC isolation and handles 40 watts and Soungate "XR4", this performs dual functions for instance to increase an aftermarket receiver to some factory amplifier system in order to add four channel amplifiers to some factory receiver. This feature tends to make adjustments on all channels.

Now, reading aln_author’s article started me off thinking so I searched for more articles on the subject and found some more gems! i.e. Car Stereo Line Output Converter (przetwornice) posted earlier today, by authlink, on a blog called Interweb Services:

There are also a variable gain feature to be able to output. Almost all of the line output converters have wire to ground the transformer. If the head unit is "on" the voltage in the output speaker wires, is virtually 50 % the DC battery and changes rapidly if it’s "on". Whereas, when the unit is "off", the voltage is 0 volt DC.

 [...]

It accepts speaker level outputs and converts the theifs to preamp level outputs. It has a fader control feature also that means; we can easily hook 2 channel amplifier or 4 channel amplifier easily which enables it to not lose any fader control. Adjustable line output converters (przetwornice) helps to convert the air speaker level output to your lower amplifier RCA level input. Installers use to convert their speaker level stereo to RCA levels with the assistance of Hi/low adaptors which hooks in an external car stereo amplifier. Hi/low converter with 2 channels and 4 channels can be found with or without adjustments. You have to note that the match concerning the car stereo and amplifiers are indifferent.

Finally, another fantastic post came from admin over on Few Goldfin Obtain posted a fortnight ago, entitled Audiocontrol Dql-8 8 Channel Line Output Converter which is also definitely worth a read.

It accepts speaker-level signals from your factory radio or amplifier so you can use it with any system. And the DQL-8 s auxiliary input allows you to connect an iPod satellite radio or other portable player to your setup. Inputs and outputs The DQL-8 features eight speaker-level inputs that let you connect amplified signals including multi-wire cables from Bose and other premium factory systems rated up to 400 watts. Six high-quality RCA preamp outputs send a strong signal to your amps.

Comments are closed.